Wireless video systems split into two camps. Zero-delay systems use a 5GHz link with latency around one millisecond, which is what you want feeding a live switcher or a focus puller. Compressed Wi-Fi systems cost less and reach 4K inputs, but add delay you can see. This guide compares the CVW Pro 200, Teradek’s zero-delay Bolt 4K line, and the Hollyland Mars 4K.

1. Latency and range

CVW Pro 200. Latency of 1 ms or less over 5GHz, with up to 200 m (about 655 ft) line-of-sight range.

Teradek Bolt 4K. Zero-delay transmission, sold in range tiers from 750 ft up to 3,000 ft. Teradek’s Ace 750 is the HDMI-only 1080p entry point at 750 ft.

Hollyland Mars 4K. About 0.06 seconds of latency (tested at 1080p60) and up to 450 ft (150 m) line of sight. That delay is fine for director or client monitoring. On a live cut, or for a focus puller on a tight shot, you will notice it.

2. Video quality

CVW Pro 200. Up to 1080p60 at 10-bit 4:2:2, with no visible compression artifacts. HD only.

Teradek Bolt 4K. Carries 4K sources, aimed at cinema sets, DIT carts, and video village.

Hollyland Mars 4K. Accepts 4K30 input and encodes H.264 at 8 to 20 Mbps. Image quality is good for monitoring but it is a compressed feed.

3. Connections and power

CVW Pro 200. 3G-SDI and HDMI on both transmitter and receiver, an OLED status display, Sony NP-F battery plates, and 2-pin LEMO DC input (6 to 17V). A transmitter can feed more than one receiver, though range drops when you do.

Teradek Bolt 4K. SDI and HDMI models, with a large accessory ecosystem and tight integration with SmallHD monitors.

Hollyland Mars 4K. SDI and HDMI in and out, with power from 6 to 16V DC, NP-F batteries, or USB-C. It also supports monitoring on phones and tablets.

Comparison table

CVW Pro 200 Teradek Bolt 4K Hollyland Mars 4K
Transmission Zero-delay 5GHz Zero-delay H.264 over Wi-Fi bands
Latency 1 ms or less Near zero About 60 ms
Line-of-sight range 200 m / 655 ft 750 to 3,000 ft by model 150 m / 450 ft
Max resolution 1080p60 4K 4K30 input
I/O 3G-SDI and HDMI SDI and HDMI SDI and HDMI
Power NP-F, 2-pin LEMO DC Multiple options NP-F, DC, USB-C
Typical price About $1,900 Several thousand dollars About $400 to $650

Which one fits

Choose the CVW Pro 200 for zero-delay HD into a live switcher at a price well below the big cinema brands.

Choose Teradek Bolt 4K for high-end cinema work where 4K, longer range, and SmallHD integration justify the cost.

Choose Hollyland Mars 4K for budget monitoring, video village, and situations where 60 ms of delay does not matter.

Specs checked against manufacturer and reseller listings in November 2026.