vMix 29 Hardware Requirements: What GPU and CPU You Actually Need
Last updated November 2026. Based on vMix’s published reference systems and knowledge base, plus what we see building Switchblade systems.
vMix will start on almost any Windows PC. Running a live show without dropped frames is a different matter. Here is what vMix 29 actually needs, which parts matter most, and the mistakes we see most often when people bring us a PC that “should have worked.”
The short answer
- GPU: a dedicated NVIDIA GeForce RTX card. An RTX 3050 handles a four camera HD stream. Step up to an RTX 5060 Ti or 5070 Ti for eight cameras, replay or 4K.
- CPU: a current Intel Core Ultra 5 for basic streaming, Core Ultra 7 for replay, Xeon class for very large 4K shows.
- RAM: 16 GB minimum, 32 to 64 GB for replay, always in at least two memory modules.
- Storage: NVMe SSD, with a separate dedicated drive for replay and recording.
- Avoid: AMD Radeon or Intel integrated graphics, NVIDIA MX series laptop chips, and single stick RAM configurations.
vMix reference systems at a glance
vMix publishes tested reference builds. These are the current ones, summarized:
| Build | What it handles | CPU | GPU | RAM |
|---|---|---|---|---|
| Opal | 4 HD cameras up to 60p, streaming plus one recording | Core Ultra 5 245KF | RTX 3050 6GB | 16 GB DDR5 |
| Sapphire (laptop) | 4 HD cameras over Thunderbolt 4, streaming and recording | Core Ultra 9 290HX Plus | RTX 5070 Ti (5060 or better) | 16 GB DDR5 |
| Ruby | 8 HD cameras with 4 camera instant replay | Core Ultra 5 250KF Plus | RTX 5060 Ti 16GB | 32 GB DDR5 |
| Topaz | 8 HD or 4 4K cameras, 8 camera HD replay | Core Ultra 7 270K Plus | RTX 5070 Ti 16GB | 64 GB DDR5 |
| Obtanium | Up to 24 HD or 6 4K cameras, 8 camera replay | Xeon W5-2565X | RTX 4080 SUPER 16GB | 64 GB DDR5 RDIMM |
Source: vMix reference systems.
Graphics card: the part that matters most
vMix does nearly all of its mixing, effects and GT title rendering on the graphics card, and it is written around NVIDIA hardware. vMix’s own guidance is to avoid Intel integrated graphics, AMD Radeon graphics and NVIDIA MX series laptop graphics. The NVIDIA encoder (NVENC) also lets the card handle streaming and MP4 recording, which takes load off the CPU.
The question we hear most is how many streams and recordings one card can handle at once. NVIDIA has historically limited the number of simultaneous NVENC sessions on GeForce cards. vMix reported that NVIDIA’s December 2025 GeForce drivers (591.44) appear to raise that limit to 12. If you run several streams plus ISO recordings, keep your driver current and test your full show before the event.
CPU
The CPU matters most for capture, replay and decoding compressed sources like NDI HX and SRT. vMix’s reference builds use current Intel Core Ultra processors for everything up to eight camera replay, and a Xeon workstation for the largest 4K configurations. Older platforms are where people get into trouble. vMix specifically advises against first and second generation Ryzen and Threadripper, older Xeon and dual processor servers, and X99 era Intel CPUs.
Memory
16 GB is enough for most streaming shows. Replay systems in the reference list use 32 to 64 GB. The detail people miss is the number of memory sticks. vMix warns that a single memory module can cause severe performance problems, so use at least two, and four on workstation platforms.
Storage for replay and recording
For instant replay, vMix asks for a dedicated SSD separate from Windows. At the top end, eight channel HD replay needs an M.2 NVMe drive that sustains at least 500 MB/s read and write at the same time. Put Windows and vMix on one drive and recordings and replay on another.
Laptops
A laptop works well for up to four cameras if you choose carefully. Look for Thunderbolt 4 for external capture, an RTX 5060 or better, and a MUX switch or Advanced Optimus so the NVIDIA card drives the display directly. vMix notes that laptops without a MUX switch or G-Sync can struggle at 59.94p or 50p and suggests running the show at 29.97p or 25p instead. Do not put eight input capture cards in a Thunderbolt enclosure on a laptop.
Where Switchblade systems fit
Every Switchblade system is built to these requirements or above, with capture cards installed, vMix configured and the full show tested before it ships. If you would rather not chase drivers, BIOS settings and memory configurations yourself, that is the point. Compare the options in our turnkey vs DIY vMix PC guide, or spec a system in the vMix system configurator.
Frequently asked questions
Does vMix run on a Mac?
No. vMix is Windows only. vMix 29 runs on 64 bit Windows 10 and 11, and current reference systems use Windows 11.
Is an AMD graphics card OK for vMix?
No. vMix recommends against AMD Radeon graphics. Use an NVIDIA GeForce RTX card.
What GPU do I need for vMix replay?
vMix’s four camera replay reference build uses an RTX 5060 Ti 16GB, and its eight camera build uses an RTX 5070 Ti 16GB.
Do I need a workstation card like an NVIDIA RTX PRO?
Usually not. vMix’s reference builds use GeForce cards. vMix advises avoiding older Quadro cards with three digit model numbers such as the P600 or P520.