OMT vs NDI vs SDI: Which Video Transport for a Small Studio (2026)
Last updated November 2026.
A few years ago the choice for a small studio was simple: SDI if you could afford the cable runs, NDI if you wanted to use your network. Now there is a third option. Open Media Transport (OMT) is a free, open source protocol that vMix 29 supports natively. Here is how the three compare and which one fits your room.
The short answer
- SDI for cameras where timing and reliability matter most, such as the main switcher feeds in a fixed studio or truck.
- NDI (full bandwidth or HX3) for the widest hardware ecosystem: PTZ cameras, converters, monitors and software that already speak it.
- OMT for computer to computer links between vMix systems and other OMT software, especially where you want an open, royalty free protocol with alpha channel support.
Most small studios end up using two of them, usually SDI or NDI for cameras and NDI or OMT between computers.
Side by side
| SDI | NDI (full bandwidth) | NDI HX3 | OMT | |
|---|---|---|---|---|
| Cable | Coax (BNC) or fiber | Ethernet | Ethernet | Ethernet |
| Compression | None | Light, visually lossless | H.264 or H.265 | VMX codec, 4:2:2, adjustable quality |
| 1080p60 bandwidth | 3 Gb/s on its own cable | About 125 to 150 Mb/s | About 50 to 62 Mb/s | About 86 / 200 / 260 Mb/s (low / medium / high) |
| 4K60 bandwidth | 12 Gb/s (12G-SDI) | About 250 to 400 Mb/s | About 84 to 110 Mb/s | About 200 / 300 / 600 Mb/s |
| Alpha channel | No | Yes | Yes | Yes |
| Licensing | Open standard | Proprietary, owned by Vizrt | Proprietary, owned by Vizrt | Open source, MIT license, royalty free |
| Hardware ecosystem | Universal | Very large | Large and growing | Early, mostly software |
Bandwidth figures are approximate and come from the NDI and OMT project documentation. Real numbers vary with content and settings.
SDI: still the reference
SDI sends uncompressed video down a dedicated cable with fixed, predictable timing. There is no network to configure and nothing for another device to congest. That is why trucks and broadcast studios still run their main cameras on SDI, and why our Switchblade rack systems are built around 3G-SDI and 12G-SDI inputs. The cost is cabling: every source needs its own run, and every input needs a capture card channel.
NDI: the network standard
NDI’s strength is its ecosystem. PTZ cameras, converters, monitors and nearly every production application support it, and a single network cable can carry video, audio, tally, PTZ control and PoE power. Full bandwidth NDI at 1080p60 uses roughly 125 to 150 Mb/s, so a gigabit switch fills up after a handful of sources. NDI HX3 uses H.264 or H.265 to bring that down to roughly 50 to 62 Mb/s while keeping latency low. Most current PTZ cameras, including the Z CAM P2-R1, offer HX3. To bridge SDI or HDMI gear into an NDI network, use a converter such as the Science Image NDI HD mini.
OMT: the open alternative
OMT was built for multiple HD feeds on a standard gigabit network without special hardware. It uses the VMX codec, the same codec vMix has used internally for years, with 4:2:2 color and alpha support. It runs over TCP, finds sources with standard DNS-SD discovery, and is released under the permissive MIT license, so anyone can build it into a product without royalties. vMix 29 can send and receive OMT, and it defaults to medium quality.
The tradeoffs are maturity and bandwidth. There are far fewer OMT cameras and converters than NDI devices today, and at high quality OMT uses more bandwidth than full NDI. Early reports from users comparing the two are mixed on image quality and latency, so test it in your own setup before standardizing on it. Where OMT shines right now is linking vMix machines together, for example sending a graphics or replay system’s output into the main switcher, and for anyone who wants to avoid depending on a proprietary protocol.
A sensible plan for a small studio
- Run your main cameras on SDI if the cable runs are practical, or NDI HX3 PTZ cameras if they are not.
- Put all network video on its own switch, separate from office and internet traffic.
- Use NDI or OMT between computers. Try OMT for vMix to vMix links, and keep NDI for third party gear.
- Budget network capacity for full bandwidth streams, not just the cameras. Multiview outputs and monitor feeds add up quickly.
Frequently asked questions
Does vMix support OMT?
Yes. vMix 29 supports sending and receiving OMT alongside NDI, SRT and SDI capture.
Is OMT better than NDI?
Not across the board. OMT is open source and royalty free and supports alpha, but NDI has a much larger hardware ecosystem today. For most studios the right answer is to use both where each fits.
How many NDI cameras can a gigabit network handle?
Roughly five to six full bandwidth 1080p60 streams, or many more at HX3. Leave headroom for outputs and monitors.
Can I mix SDI and NDI in one show?
Yes. A Switchblade vMix system takes SDI, HDMI, NDI, OMT and SRT inputs in the same production.