Update: an earlier version of this page described Reflecmedia as an “on-camera cueing” system and compared it to a network switch maker. Reflecmedia actually makes a chroma key system, so this guide now compares it with the two approaches it really competes with: a traditional green screen and an LED wall.

Every virtual set or composited shot starts with getting a clean separation between talent and background. There are three common ways to do it, and the right one depends on your space, your budget, and how many cameras you run.

1. Reflecmedia Chromatte and LiteRing

How it works. Chromatte is a retro-reflective fabric covered in tiny glass beads. A LiteRing, a ring of green or blue LEDs mounted around the camera lens, shines onto the fabric, and the beads reflect that light straight back into the lens. The camera sees a bright, even green or blue background. To the eye, and to the talent, the backdrop looks grey.

Strengths. No separate backdrop lighting, very little color spill on the talent, and it works in tight spaces where you cannot get distance between talent and wall. The LiteRing mounts to the lens with adapters (for example 112mm down to 94mm or 67mm) or to a matte box rail.

Trade-offs. Each camera needs its own LiteRing. Works best with the camera facing the backdrop fairly squarely. The fabric and rings cost more up front than paint.

2. Traditional green or blue screen

How it works. Painted cyc walls or fabric, lit separately from the talent.

Strengths. Cheapest to start, any number of cameras from any angle, and it scales to large stages.

Trade-offs. It needs space and even lighting to key well. Green spill on talent, shadows, and wrinkles are the usual problems, and lighting the screen adds fixtures and power.

3. LED wall

How it works. The background is displayed on an LED wall behind the talent and captured in camera, so there is nothing to key.

Strengths. Real reflections and light on talent, and what the director sees is the final image.

Trade-offs. By far the most expensive option. For camera moves with correct perspective you also need camera tracking and a real-time engine.

Comparison table

Reflecmedia Chromatte + LiteRing Traditional green screen LED wall
Space needed Small Medium to large Medium to large
Backdrop lighting Not needed (LiteRing per camera) Required Wall is the light source
Spill on talent Very low Common None (no key)
Camera angles Best facing the backdrop Any Any, with tracking for parallax
Up-front cost Moderate Lowest Highest

Which one fits

Choose Reflecmedia for small studios, offices, and podcast rooms where you need a clean key without room to light a screen.

Choose a traditional green screen for larger stages, many cameras, and the lowest starting cost.

Choose an LED wall when budget allows and you want in-camera results with no keying.

Whichever you pick, VirtualSetWorks sets and Switchblade systems can handle the compositing. Contact USBroadcast for Reflecmedia LiteRings, adapters, and controllers.

Reviewed November 2026.