Switchblade RP800 vs. RP400 vs. SKAARHOJ Time Spin: vMix Replay Controllers Compared
vMix Replay is a capable slow-motion engine. vMix Pro and MAX record up to eight cameras continuously, and vMix 4K handles one. Driving it with a keyboard and mouse during a fast game is where most operators struggle. A dedicated replay controller puts marking, camera selection, speed, and scrubbing under your fingers. Here is how the main options compare.
A note on earlier versions of this page: Waterbird makes camera motion control (sliders and joystick controllers) and Extron SMP units are presentation recorders. Neither is an instant replay controller, so they are not compared here.
1. Switchblade RP800 (8 channels)
An eight-channel replay and slow-motion controller built for vMix Replay. It has 42 dual-color backlit buttons, including two rows of 1 to 8 camera and output buttons, clip in and out, play and pause, and event shortcut keys. A photoelectric T-bar sets playback speed, and a quiet jog knob scrubs the timeline. Preset buttons place marks at NOW, minus 5, minus 10, and minus 20 seconds. It connects to the vMix computer over USB for power and data, with LAN, RS-232, and MIDI also supported.
Price: $1,195, or $2,299 bundled with vMix Pro.
2. Switchblade RP400 (4 channels)
The four-camera version, for productions running up to four replay angles. Same idea as the RP800, with queueing, end points, and timeline jog control for vMix Replay.
Price: $695.
3. SKAARHOJ Time Spin
An IP-based replay controller built on SKAARHOJ’s Blue Pill platform. Its strength is breadth: it works with vMix and also with Softron m:Replay, TriCaster 3Play, NetOn.Live, and Dreamchip SSM500, and it ties into SKAARHOJ’s wider ecosystem of integrations. That flexibility makes it a good fit for facilities running more than one replay platform. It also costs more than a vMix-specific panel.
4. General-purpose controllers
vMix Replay also works with JLCooper, Contour Design, X-keys, and MIDI devices, and vMix ships a template for the X-keys jog and T-bar replay unit. These can be a budget path, but you will spend time mapping shortcuts, and layouts are rarely as fast as a purpose-built replay panel.
Comparison table
| Switchblade RP800 | Switchblade RP400 | SKAARHOJ Time Spin | Generic jog/T-bar or MIDI | |
|---|---|---|---|---|
| Camera channels | 8 | 4 | Depends on replay system | Depends on mapping |
| Built for | vMix Replay | vMix Replay | vMix, m:Replay, 3Play, and others | Anything that takes shortcuts |
| Speed control | Photoelectric T-bar | Yes | Yes | Varies |
| Jog control | Yes | Yes | Yes | Varies |
| Connection | USB, plus LAN, RS-232, MIDI | USB | IP | USB or MIDI |
| Setup effort | Low | Low | Moderate | Higher |
| Price | $1,195 | $695 | Higher | Lowest |
Which one fits
Choose the RP800 if you run vMix Pro or MAX with five or more replay angles and want a panel that works out of the box.
Choose the RP400 if four angles cover your show, which is common for high school and small college sports.
Choose SKAARHOJ Time Spin if your facility uses several replay platforms and you want one controller across all of them.
Remember the license: any of these controllers needs vMix Pro or MAX for multi-camera replay. vMix 4K is limited to one replay camera.
Specs and prices checked against USBroadcast, SKAARHOJ, and vMix listings in November 2026.